Pt100 Modell IHW
Industrial reference thermometer (angled)
Angled reference thermometer for measuring external reference temperatures as temperature standard for temperature dry block calibrators.
- 90° angled
The Reference thermometer is angled 90°. This creates space for calibrating larger designs such as transmitter heads, thermometers with larger handles or flanges for installation. - Large temperature range
Reference thermometer can be used in the temperature range from -100 °C to 600 °C - Stable Pt100 temperature Sensors
Use of highly stable and aged high-temperature Pt100 measuring resistors
Calibration
It is best to calibrate the angled reference thermometer together with the temperature dry block calibrator. An individual characteristic curve of the angled reference thermometer can be programmed into the temperature block calibrator.
Technical data
| Model | Pt100IHW |
|---|---|
| temperature range | -100 °C … 600 °C |
| Nominal resistance | Pt100 (100 Ohm) |
| typical annual drift | 2,5 mK |
| Connection type | Four-wire |
| Connection cable | Temperature resistant – EMF low strands from own production |
| Connector | Banana plugs or depending on configuration |
| Sheath material | Metal |
| Dimension* | |
| A* | 200 mm |
| B* | 50 mm |
| C* | 750 mm |
| Handle | ∅ 12 mm x 40 mm |
| Diameter | 4 mm |
| Measuring resistor / temperature sensor | |
| R0 | 100 Ohm ± 0,05 Ohm |
| Alpha | 0,003850 ± 0,000005 |
| Standard | IEC 60751:2008 |
| Limits | 1/10 DIN |
| Length | 25 mm |
| Recommended measuring current | 1 mA |
| Self-heating | 4 mK |
*Dimensions Pt100 IHW see sketch:
