
Pt100 Model IN
Industrial reference thermometer
Precise reference thermometer for measuring accurate temperatures or as industrial temperature standard e.g. for dry block calibrators.
- slim design
The temperature sensor with a diameter of 4mm and a small handle enables use in limited spaces, e.g. for dry block calibrators.
- Pt 100 temperature sensors
Use of highly stable and annealed temperature sensors
Calibration
eXacal thermometers are calibrated in our own DAkkS calibration laboratory. The DAkkS accreditation ensures that all calibrations are traceable to national and international standards. The measurement uncertainty is calculated from many components. The largest contributions are reproducibility, ITS-90 characteristic curve, self-heating and hysteresis.
Measurement Uncertainties
Technical Data
Model | Pt100IN |
---|---|
Temperature range | -100 °C … 400 °C |
Nominal resistance | Pt 100 (100 Ohm) |
typical annual Drift | 2,5 mk |
Connection type | Four-Wire |
Connection cable | Temperature resistant – low EMF stranded wires from own production |
Connection depending | banana plugs or depending on configuration |
Sheath material | metal |
Dimensions | |
Handle | ∅ 12 mm x 40 mm |
Diameter | 4 mm |
Length | 200 mm |
Connection cable | 1 m |
Temperature sensor | |
R0 | 100 Ohm ± 0,05 Ohm |
Alpha | 0,003850 ± 0,000005 |
Standard | IEC 60751:2008 |
Tolerance | 1/10 DIN |
Length | 25 mm |
Recommended measuring current | 1 mA |
Self-heating | 4 mK |
Questions about Thermometers?